Sound Quilt Assembly Replacement.

TM 10-5410-228-24

2.13.32 Sound Quilt Assembly Replacement.

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Tools/Test Equipment:

Materials/Parts:

Shop Equipment, Automotive Maintenance and

One Hundred and Seven Lockwashers

Repair (Item 38, Appendix B)

Equipment Condition:

Items secured to LMS walls removed (Reference

TM 10-5410-228-10, Appendix E, Load Plan)

a. Removal (Refer to Figure 2-54)

NOTE

The following steps apply to all sound quilt assemblies except floor sound quilt, which is not

secured to LMS.

(1)

Remove screws (1), lockwashers (2) and flat washers (3). Discard lockwashers (2).

(2)

Pull sound quilt assembly (4) from fastener loop on LMS.

b. Installation (Refer to Figure 2-54)

(1)

Install new sound quilt assembly (4) so fastener hook aligns with fastener loop on LMS and

grommets align with mounting holes.

(2)

Secure sound quilt assembly (4) with screws (1), new lockwashers (2) (Item 18, Appx E) and flat

washers (3).