TM 10-5410-228-24
2.13.24 Power Mode Selector Switch Replacement Continued.
NOTE
Handle and screw supplied with power mode selector switch.
(2)
Secure handle (13) to power mode selector switch (5) with screw (12).
d. Installation (Refer to Figure 2-45)
(1)
Secure power mode selector switch (5) with switch bracket (11) to rear of pan assembly (6) with
four screws (1), four flat washers (2), four new lockwashers (3) (Item 16, Appx E) and four nuts
(4).
(2)
Secure cover plate (10) to pan assembly (6) with two screws (7), two new lockwashers (8) (Item
17, Appx E) and two flat washers (9).
(3)
Install wires on power mode selector switch (5) and remove tags.
6
1
11
23
4
18
17
5
16
10
19
15
14
9
8
7
12
13
116-1-M
Follow-on maintenance: Connect ECV battery ground cable per TM 9-2320-387-24-1 or connect external
power cable, install guard per para 2.13.20 or 2.13.21, close cover assembly per para 2.13.22, remove tags
from power panel and cab area, apply power and perform operational test.
2-226
