• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ASSEMBLY AND PREPARATION FOR USE
GENERAL OPERATING PROCEDURES - Continued

Recharging Unit, Carbon Dioxide Reciprocating Pump, Electric Motor Driven, Ac, 115Volt Single Phase, 60 Hz, 1Hp, 12681, 12681-2
Page Navigation
  7    8    9    10    11  12  13    14    15    16    17  
img
. .
TM5-3655-214-13&P
2-6. GENERAL OPERATING PROCEDURES
WARNING
Carbon Dioxide (C02) when exposed to the flesh, produces an effect similar to a
scald or burn. Use care to avoid contact with it.
Do not attempt to disconnect hoses until pressure has been relieved.
Be sure recharging unit is grounded properly during operation.
a. Insure that the instructions in para 2-5 have been complied with.
NOTE
Determination of filled service cylinder is normally calculated by weight. During
filling operation, it is recommended that the service cylinder be mounted on a
large scale to permit easy determination of when cylinder is filled.
b. Place empty service cylinder on scale. Note weight of cylinder and record.
c.
Connect discharge hose to valve on service cylinder to be recharged and open service cylinder valve.
2-8


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.