TM5-3655-214-13&P
2-5. ASSEMBLY AND PREPARATION FOR USE- Continued
b. Perform preventive maintenance checks and services Paragraph 2-4.
c.
Check that the following valves are in the closed position: inlet bleed valve, discharge blow-off valve and discharge
shutoff valve.
d. Set supply cylinder in tilt-rack cradle and in normal upright positi on.
e. Attach safety chain to hook and tighten toggle clamp to retain cylinder securely.
f.
Refer below and rotate tilt-rack cradle to inverted position and install locking pin to secure this position.
g. Connect inlet hose to supply cylinder valve as shown below.
2-7