AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.3
237
11 DECEMBER 2001
A8.6.3. Steel drums (1A2) or fiber drums (1G) not exceeding 220 L (58 gallons) capacity each with inner metal
cans not over 4 L (1 gallon) capacity each, closed by positive means, not by friction. The following additional
requirements must be met:
-
Inner packaging must have no opening exceeding 25 mm (1 inch) in diameter and must be surrounded with
non combustible absorbent cushioning material.
-
Net quantity of pyrophoric liquids must not exceed two-thirds of the rated capacity of the outer drum. For
example, a 220 L (58 gallon) outer drum must not contain more than 147 L (39 gallons) of pyrophoric
liquids.
-
A metal plate separator in addition to the noncombustible absorbent cushioning material must separate each
layer of inner packagings.
A8.7. Diphenyloxide-4, 4-Disulphohydrazide; N, N Dinitroso-N, N Dimethyl Teraphthlamide (not more than
72 percent as a paste). Temperature controls are not required.
A8.7.1. Package in a fiber drum (1G) with a plastic liner or internal coating. Maximum gross weight is 50 kg (110
pounds).
A8.7.2. Package in a sift-proof fiber drum (1G). Maximum gross weight must not exceed 110 pounds (50 kg).
A8.8. 1,1 Azodi-(Hexahydrobenzonitrile); Benzene Sulfohydrazide; Benzene-1,3-Disulfohydrazide (not more
than 52 percent as a paste); N,N-Dinitrosopentamethylenetetramine (not more than 82 percent with
phlegmatizer). Temperature controls are not required.
A8.8.1. Package in a fiber drum (1G) with a plastic liner or internal coating. Maximum gross weight is 50 kg (110
pounds).
A8.8.2. Package in an inner container that must be a single plastic bag. Outer packaging must be a fiberboard box
(4G). Maximum gross weight is 50 kg (110 pounds).
A8.8.3. Package in an inner packaging which must be either plastic boxes, plastic bottles or jars. Outer packaging
must be a fiberboard box (4G). Maximum weight of inner packaging is 5 kg (11 pounds). Maximum gross weight:
40 kg (88 pounds).
A8.8.4. Outer package must be a sift-proof fiber drum (1G). Maximum gross weight is 55 kg (110 pounds).
A8.9. 3-Chloro-4-DiethylaminobenzenediazoniumZinc Chloride; 4-Dipropylaminobenzenediazonium Zinc
Chloride; Sodium 2-Diazo-1Naphthol-4-Sulphonate; Sodium 2-Diazo-1-Naphthol-5-Sulphonate. Temperature
controls are not required.
A8.9.1. Package in a fiber drum (1G) with a plastic liner or internal coating. Maximum gross weight is 50 kg (110
pounds).
A8.9.2. Package in an inner packaging which must be a plastic bag. Place in an outer packaging which must be
either a steel removable head drum (1A2) or an aluminum removable head drum (1B2). Maximum gross weight is
55 kg (121 pounds).
A8.10. 2-Diazo-1-Naphthol-4-Sulphochloride and 2-Diazo-1-Naphhthol-5-Sulphochloride. Temperature
controls are not required. Package in a fiber drum (1G) with plastic liner or internal coating. Maximum gross
weight is 50 kg (110 pounds).
A8.11. Barium Azide, Wetted (with not less than 50 percent water by mass). Pack barium azide, wetted (with
not less than 50 percent water by mass) in wooden boxes (4C1, 4C2, 4D, or 4F), or fiber drums (1G) with inner
glass receptacles not over 0.5 kg (1.1 pounds) capacity each. Inner receptacles must have rubber stoppers wire-tied
for securement. If transportation is to take place when freezing weather is possible, a suitable antifreeze solution
must be used to prevent freezing.
A8.12. Calcium Pyrophoric; Magnesium Diphenyl; Metal Catalyst, Dry; Pyrophoric Metals, NOS and
Pyrophoric Solids, NOS.
A8.12.1. Package in wooden boxes (4C1, 4C2, 4D, or 4F) with inner metal receptacles that have a positive (not
friction) means of closure. Inner metal receptacles must not contain more than 15 kg (33 pounds) each.
A8.12.2. Package in fiberboard boxes (4G) with inner metal receptacles that have a positive (not friction) means of
closure. Inner metal receptacles must not contain more than 7.5 kg (17 pounds) each.
