2-166
TM 3-4230-209-30&P
2-33. LIQUID FUEL WATER HEATER AND CABINET TOP COVER (CONT).
LOCATION/lTEM
ACTION
REMARKS
REASSEMBLY (CONT)
Liquid Fuel Water Heater and
Cabinet Top Cover/
Rear access cover (34)
Insert rear access cover (34) into cabinet frame (5). Position rear access
Machine screws (35)
cover (34) to aline the eight end holes. Install eight machine screws (35)
Internal tooth lock
and secure with eight internal tooth lock washers (36) and hexagon plain
washers (36)
nuts (37).
Hexagon plain nuts (37)
Loop clamp (38)
Coil excess length of capillary tube into a coil no less than six inches in
Machine screw (39)
diameter. Slide loop clamp (38) around the coiled capillary tube and make
sure capillary will not be pinched in the loop clamp (38). Secure with
Internal tooth lock
washer (40)
machine screw (39), internal tooth lock washer (40), and hexagon plain
Hexagon plain nut (41)
nut (41).
Quick disconnect
Wrap the male threads on the pipe coming from the boiler assembly (1)
coupling (42)
and quick disconnect coupling (42) with antiseizing tape.
Pipe elbow (43)
Screw quick disconnect coupling (42) into pipe elbow (43). Screw onto
pipe of boiler assembly (1) as a unit.