TM 3-4230-209-30&P
2-144
2-31. HOPPER ACCESS COVER.
This task covers disassembly/repair/reassembly.
INITAL SETUP
References
Tools and Special Tools
Automotive Maintenance and Repair Field Maintenance
Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)
Equipment Condition
Hopper access cover removed.
Materials/Parts
Adhesive (item 1, app C)
Gasket (fig D-28)
Paint brush (item 6, app C)
Polyurethane coating (item 29, app C)
REMARKS
ACTION
LOCATION/lTEM
DISASSEMBLY/REPAIR/REASSEMBLY
Hopper Access Cover/
Scrape gasket (1) from hopper lid (2) underside if damaged.
Gasket (1)
Hopper lid (2)
Replace authorized unserviceable gasket. Repair the access cover by
fabricating new gasket (1) according to figure D-28 Bond gasket (1) to
hopper lid (2) with adhesive.
Apply adhesive to underside of hopper lid (2) and position new gasket (1)
into proper position. Trim any excess length from gasket for proper fit.
