Bracket clamps (18)
Install three bracket clamps (18) and one bracket clamp (19). Insert eight
spring pins (20), into the four posts with one spring pin above and one-
Bracket clamps (19)
Spring pins (20)
spring pin below each bracket clamp (18 and 19).
Bolts (21)
Unscrew four bolts (21) and nuts (22) and remove from four shackles (23)
Nuts (22)
and slide shackles (23) over the four projection tabs welded to the tank.
Shackles (23)
Reinstall the four bolts (21) and nuts (22) through each shackle (23),
tighten, and tack-weld the nuts to the bolts.
Pipe elbow (24)
Screw pipe elbow (24) onto the end of
metallic pipe (11). Tighten and position
so that open end of pipe elbow (24) is
pointed toward the hopper assembly
hole.
Quick disconnect
Using antiseizing tape or sealing com-
coupling half (25)
pound, wrap or coat the external
threads of quick disconnect coupling
half (25). Screw quick disconnect cou-
pling half (25) into pipe elbow (24) and
tighten.
2-143
TM 3-4230-209-30&P
