TM 3-4230-209-30&P
2-84
2-20. SKID BASE SUBASSEMBLY (CONT).
REMARKS
ACTION
LOCATION/lTEM
R E A S S E M B L Y (CONT)
NOTE
Skid Base Subassembly/
The oil pressure switch is mounted at the rear of the engine
if manufactured after January 1969. The oil pressure switch
is mounted at the front of the engine on engines manufac-
tured prior to January 1969.
Engine components installation and routing will be in accor-
dance with TM 5-2805-259 series.
Wrap male threads of pipe elbow (31) and oil pressure switch (32) with
Pipe elbow (31)
antiseizing tape or coat with sealing compound before installing.
Oil pressure switch (32)
Electrical lead (33)
Install pipe elbow (31) and oil pressure switch (32). Connect electrical
lead (33).
OR
Wrap male threads of tee connector (34) and oil pressure switch (32) with
Tee connector (34)
antiseizing tape or apply sealing compound before installing.
Install tee connector (34), oil pressure switch (32), and connect electrical
lead (33).