2-80
TM 3-4230-209-30&P
2-20. SKID BASE SUBASSEMBLY (CONT).
LOCATION/lTEM
REMARKS
ACTION
REASSEMBLY
Skid Base Subassembly/
Remove two machine bolts (1) and lock washers (2) from rear engine
Machine bolt (1)
mount (3). Position two shock mount pads (4) onto rear engine mount
Lock washer (2)
over the holes.
Rear engine mount (3)
Shock mount pad (4)
Remove hexagon plain nut (5), lock washer (6), and machine bolt (7) from
Hexagon plain nut (5)
front engine mount (8). Position shock mount pad (9) to aline with hole.
Lock washer (6)
Machine bolt (7)
Front engine mount (8)
Position engine (10) to rest on shock mount pads (4 and 9) and aline the
three sets of holes. Reinstall the two machine bolts (1) and lock
Shock mount pad (9)
washers (2) through the engine (10) shock mount pads (4) and into rear
Engine (10)
engine mount (3). Reinstall machine bolt (7), lock washer (6), and hexagon
plain nut (5) in front engine mount area.
Install throttle clip (11) if engine (10) has a carburetor built by Bendix
Throttle clip (11)
Corporation and secure with screw (12) supplied with the engine (10).
Screw (12)
