TM 3-4230-209-30&P
2-66
2-20. SKID BASE SUBASSEMBLY.
This task covers:
c. Reassembly
a. Disassembly
b. Repair
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Unit maintenance authorized components are removed in
Automotive Maintenance and Repair Field Maintenance
TM 3-4230-209-20&P and are not covered in this manual.
Shop Equipment, Basic, Less Power (SC 4910-95-CL-A31)
Special Safety Instructions
Materials/Parts
Antiseizing tape (item 38, app D)
Sealing compound (item 32, app D)
WARNING
Wooden blocks
Unless the skid base subassembly is securely blocked, never reach under
it while it is raised off the floor. Failure to comply may result in a crushed
References
arm.
TM 9-237
TM 43-0139
TM 5-2805-259 series
REMARKS
ACTION
LOCATION/lTEM
Skid Base Subassembly/
Remove hexagon head cap screw (1), internal tooth lock washer (2), and
Hexagon head cap
bracket (3) from alternator generator (4). Remove nut (5), washer (6), and
screw (1)
Internal tooth lock
disconnect ground lead (7). Replace nut (5) and washer (6). Remove
nut (8), washer (9) and groove pulley (10). Remove two hexagon plain
washer (2)
nuts (11), internal tooth lock washers (12), hexagon head cap
Bracket (3)
screws (13), and internal troth lock washers (14). Remove alternator
Alternator generator (4)
generator (4).
Nut (5)
Washer (6)
Ground lead (7)
Nut (8)