TM 10-5410-228-24
This task covers:
a. Removal
c. Installation
b. Repair
INITIAL SETUP
Equipment Conditions:
Tools/Test Equipment:
Multimeter, (Item 27, Appendix B)
Power shut off, power panel and rear control panel
Power Supply (Item 29, Appendix B)
tagged.
Shop Equipment, Automotive Maintenance and
ECV battery cable disconnected
Repair (Item 38, Appendix B)
(see TM 9-2320-387-24-1).
Shop Equipment: Electrical Equipment
External power cable disconnected.
(Item 40, Appendix B)
Raceway covers and retainers removed
(see para 2.13.8).
Materials/Parts:
Sleeve (Figure D-4, Appendix D)
References:
TM 9-2320-387-24-1
TM 55-1500-323-24
CBPS contains high electrical currents. To prevent electrical shock when working on
electrical system, ensure that power cable is disconnected from power panel and ECV
batteries are disconnected per TM 9-2320-387-24-1. Tag power panel and battery area with
sign that states that the power must remain OFF while work is being performed.
Remove jewelry and observe all safety rules for working around high voltage.
Cables in LMS
a. Removal
Refer to para 2.13.27 for removal of cable assemblies.
b. Repair (Refer to Figure 3-5)
(1)
The following table contains information pertaining to cable assembly repair.
(2)
Refer to para 2.13.27 for repair of cable assemblies not included in the following table.
Cable No.
(CAGE C) Part No.
Repair Status
1A4W1
(81377) 17-1-9388-1
Repair cable assembly per TM 55-1500-323-24.
1A4W2
(81377) 17-1-5896-1
Repair cable assembly per TM 55-1500-323-24.
1A4W6
(81377) 17-1-5550-1
Repair cable assembly per TM 55-1500-323-24.
A17W1
(81377) 17-2-0547-1
Repair cable assembly per TM 55-1500-323-24.
(3)
Replace connector per TM 55-1500-323-24.
(4)
Cut damaged terminal lugs off cable, crimp on new terminal lugs.
(5)
Heat shrink marker onto cable.
(6)
Perform operational test on cable assembly.
