TM 10-5410-228-24
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Tools/Test Equipment:
Shop Equipment, Automotive Maintenance and
ECV parking brake set.
Repair (Item 38, Appendix B)
NOTE
The following maintenance procedures can be used for both passenger side and driver side
seat belts.
a. Removal (Refer to Figure 2-34)
(1)
Disconnect three lap belt harness assembly clips (1) from three tie-down strap end fittings (2)
attached to the LMS. Remove lap belt harness assembly (3).
(2)
Remove three tie-down strap end fittings (2) from LMS.
b. Installation (Refer to Figure 2-34)
(1)
Install three tie-down strap end fittings (2) on LMS.
(2)
Install lap belt harness assembly (3) by connecting three lap belt harness assembly clips (1) on
three tie-down strap end fittings (2).
Figure 2-34. Seat Belt Replacement
