TM 10-5410-228-24
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Personnel Required: (2)
ECV parking brake set.
a. Removal (Refer to Figure 2-27)
(1)
While one person on outside holds louver cover (1), person on inside unscrews RF nut (2) from
wall adapter (3).
(2)
Remove louver cover (1), O-ring (4) and wall adapter (3) from LMS wall.
b. Installation (Refer to Figure 2-27)
(1)
Install wall adapter (3) into LMS wall with O-ring (4) and louver cover (1).
(2)
While holding louver cover (1), person on inside screws RF nut (2) onto wall adapter (3) until
tight.
2
3
4
1
