• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
RECIRCULATION FILTER.
PORTABLE LIGHT SET TEST AND REPAIR.

TM-10-5410-228-24 Chemical Biologiocal Protective Shelter (CBPS) System NSN 5410-01-441-8054 (Green) (EIC:5ZT) NSN 5410-01-482-4633 (Tan) Manual
Page Navigation
  388    389    390    391    392  393  394    395    396    397    398  
TM 10-5410-228-24
2.17.2 Axial Fan Impeller Replacement.
Ensure that recirculation filter is disconnected from power source before performing
maintenance procedure. Electric shock can cause serious injury or death.
a. Removal (Figure 2-70)
(1)
Position recirculation filter with bottom access cover (1) facing up.
(2)
Remove three screws (2) from bottom access cover (1).
(3)
Remove four screws (3), four lockwashers (4), four washers (5), and four nuts (6) securing fan
impeller guard (7).
(4)
Remove three screws (8) from fan hub (9) and remove axial fan impeller (10).
b. Installation (Figure 2-70)
(1)
Position axial fan impeller (10) on fan hub (9) and secure with three screws (8).
(2)
Secure fan impeller guard (7) with four screws (3), four lockwashers (4), four washers (5), and
four nuts (6).
(3)
Position bottom access cover (1) and secure with three screws (2).
9
3
10
8
7
6
4
1
5
2
7
S 2-6
CBP
Figure 2-70. Recirculation Filter Axial Fan Impeller Replacement
2-330






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.