TM 10-5410-228-24
2.17 RECIRCULATION FILTER.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools/Test Equipment:
Shop Equipment, Automotive Maintenance and
Repair (Item 38, Appendix B)
a. Removal (Figure 2-69)
Ensure that recirculation filter is disconnected from power source before performing
maintenance procedure. Electric shock can cause serious injury or death.
NOTE
Change filter in recirculation filter prior to every mission.
(1)
Disconnect recirculation filter unit (1) from power source.
(2)
Unlatch four link-lock fasteners (2) from cover (3).
(3)
Remove cover (3) and filter element (4).
b. Installation (Figure 2-69)
(1)
Install new filter element (4) with metal hem (5) facing downward.
(2)
Replace cover (3).
(3)
Latch four link-lock fasteners (2).
3
4
5
2
1