TM 5-3740-218-13&P4-10.PMCS TABLETable 4-1. Unit Level PMCS (Cont)NOTE: Within designated interval, these checks are to be performed in the order listed.M-MonthlyS-SemiannuallyA-AnnuallyITEMNO.INTERVALITEM TO BEINSPECTEDPROCEDUREMSA6Primary HydraulicCheck manifold for Class III hydraulic leaks at fittings.ManifoldReplace as required (para 4-36.)Check manifold for security in mounting. Tighten asrequired.Check liquid-filled pressure gage for leaks. Replace asrequired (para 4-36).7SecondaryCheck manifold for Class III hydraulic leaks at fittings.Hydraulic ManifoldReplace as required (para 4-32).Check manifold for security in mounting. Tighten asrequired.Check liquid-filled pressure gage for leaks. Replace asrequired (para 4-32).8Hydraulic LinesCheck all hydraulic lines to ensure fittings are tight andnot leaking. Tighten as required.Check for severely chafed or rubbed spots that would leadto failure. Replace lines (para 4-32 and 4-34).9EngineCheck engine for security in mounting to frame. Tightenas required.Check cooling fins for cracks or breaks.Check air cleaner for security and damage. Tighten orreplace as necessary.Check hydraulic pump for Class III leaks and mountingbolts for tightness. Replace pump (para 4-27) and tightenbolts and hoses.Check for obvious external damage.Check all engine-mounted accessories and componentsfor security and obvious damage. Tighten or replace asrequired.Check engine oil level. Fill as required.10Starter MotorCheck starter motor mounting bolts for tightness. Tightenas required.Check electrical lead attach points for tightness. Tightenas required.11CarburetorCheck hoses and gaskets for leaks. Replace as necessary.Check for free movement of choke assembly and linkage.Replace as necessary (para 4-21).4-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
