TM 5-3740-218-13&P Table 2-4.  Operator Level PMCS (Cont) NOTE:  Within designated interval, these checks are to be performed in the order listed. B-Before D-During A-After B D A • • Hydraulic Check for proper hookup to pump Leaks exceed Class II, Lines and primary manifold.  Check for or lines installed leaks at manifold and rotary incorrectly. atomizers. • • Rotary Check for secure mounting. Mounting is loose. Atomizers WARNING Operator should be aware that foreign objects in slinger can cause injury when system is activated. 13 • • SD System Check all L-clamps for tightness. Missing L-clamps Chutes Check for proper attachment of cause leaks, or chute hydraulic lines.  Check chute gates malfunction. gates for smooth operation and tight closure. • • Empty Check empty sensor connection Light on hand control Sensor and operation. unit inoperative. 14 • • SD System Check tightness of attachment Hardware missing or Slinger/ hardware.  Check for proper slinger malfunctions. Hopper attachment of hydraulic lines. Assembly Check for proper activation by hand control.  Check for foreign objects in slinger. 15 • • Liquid Flush entire system including All assemblies not System bucket, crosstube and pump properly cleaned. assembly, booms, nozzles, liquid pesticide lines (ULV), and rotary atomizers using appropriate solvent. 2-13 INTERVAL ITEM NO. Item To Be Inspected EQUIPMENT IS NOT READY/AVAILABLE IF: Procedures