TM 5-3740-218-13&PNOTESquare cut ring and thrust plate may or may not remain with cover.Take special note of wear pattern on thrust plate and wear plate. Note that longjournal of drive gear is toward drive end of motor.(7)If square cut ring (8) and thrust plate (9) remain with body (1), remove square cut ring (8) and lift out thrustplate (9). Discard square cut ring.(8)Lift out drive gear shaft (5), drive gear (10), wear plate (11), and pressure loading seal (12). Discardpressure loading seal.CAUTIONRemove shaft seal carefully. Do not damage shaft seal bore or seal leakage willresult.(9)Remove ball bearings (13).(10)Invert motor body with shaft seal (14) up. Remove retainer (15). Remove shaft seal (14) by prying seal out with large screwdriver. Discard shaft seal.5-43
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
