TM 5-3740-218-13&P
MOTOR AND SLINGER ASSEMBLY REPAIR
This task covers:
Disassembly
Assembly
A.
INITIAL SETUP
Tools and Special Equipment:
Equipment Condition:
Reference
Condition Description
Tool Kit, 5180-00-177-7033
Motor and Slinger
Assembly Removed
B.
DISASSEMBLY
(1)
Remove nut (1) and washer (2) that secure slinger (3) to slinger support weldment (4). Remove slinger (3).
(2)
Remove two nuts (5), two washers (6), two bolts (7), and two washers (8) that secure hydraulic motor (9) to
pump housing (10) and slinger support weldment (4).
(3)
Remove hydraulic hoses (11 and 12) from fittings on hydraulic motor (9). Remove hydraulic motor (9).
(4)
Remove fittings (13 and 14) from hydraulic motor (9).
(5)
Remove chute assembly (15) by removing two screws (16) and two washers (17) from adjustable plate (18),
and screw (19) and washer (20) from adjustment tab (21).
