TM 5-3740-218-13&P
MOTOR AND SLINGER ASSEMBLY REPAIR (CONT)
C. ASSEMBLY
(1) Align bottom part of chute assembly (1) with adjustment tab (2) and secure with washer (3) and screw (4).
(2) Align top part of chute assembly (1) on adjustable plate (5) and secure with two washers (6) and two screws
(7).
(3) Install fittings (8 and 9) on hydraulic motor (10).
(4) Align centrifuge pump housing (11) on slinger support weldment (12).
(5) Install hydraulic motor (10) on slinger support weldment (12), aligning pump shaft with pump housing shaft.
(6) Install two washers (13), two bolts (14), two washers (15), and two nuts (16) that ecure hydraulic motor (10) to
s
pump housing (11) and slinger support weldment (12).
(7) Install hydraulic hoses (17 and 18) on hydraulic motor fittings (8 and 9).
(8) Install slinger (19) on pump shaft and secure with washer (20) and nut (21).
4-148
