TM 5-3740-218-13&P
HYDRAULIC PUMP ASSEMBLY REPLACEMENT (CONT)
C.
INSTALLATION
(1)
Install straight adapter outlet fitting (1).
(2)
Install 90-degree elbow inlet fitting (2).
(3)
Install woodruff key (3) on pump shaft (4).
(4)
Remove engine adapter cover plate (5).
(5)
Place Lovejoy connector half (6) on pump shaft (4) and tighten setscrew (7).
(6)
Insert star (8).
(7)
Align Lovejoy connector half (6) with mating half on engine shaft. Loosen screw on mating half.
(8)
Align hydraulic pump (9) with engine adapter (10) and secure with two washers (11) and two bolts (12).
(9)
Adjust both halves of Lovejoy connector to obtain snug fit. Tighten setscrew (7).
(10)
Install engine adapter cover plate (5).
(11)
Coat hose mating area of fittings (1 and 2) with pipe joint sealer (item 56, Appendix E).
(12)
Remove cap and connect outlet hydraulic hose (13).
(13)
Remove cap and connect inlet hydraulic hose (14).
(14)
Tighten clamp (15).
(15)
Fill hydraulic reservoir.
4-62
