TM 5-3740-218-13&P
KEY SWITCHBOX ASSEMBLY REPLACEMENT
This task covers:
Removal
Installation
A.
INITIAL SETUP
Tools and Special Equipment:
Tool Kit, 5180-00-177-7033
Equipment Condition:
Reference
Condition Description
Battery Cables
Disconnected
Spark Plug Removed
B.
REMOVAL
NOTE
Tag electrical leads prior to removal to aid in installation.
(1)
Disconnect bucket harness connection A1 (1) (black and red wire).
(2)
Disconnect bucket harness connection B1 (2) (white wire).
(3)
Disconnect bucket harness connection B2 (3) (white wire).
(4)
Disconnect charging coil connection (4).
(5)
Disconnect bucket harness connection J2 (5) (white with red dot wire).
(6)
Disconnect yellow and green oil level switch electrical leads (6).
(7)
Disconnect starter solenoid electrical leads (7).
(8)
Remove switchbox assembly front panel (8) by removing four screws (9).
(9)
Remove key switchbox assembly (10) from engine angle (11) by removing two nuts (12), four washers (13),
and two bolts (14).