TM 5-3740-218-13&P
4-10.
PMCS TABLE
Table 4-1. Unit Level PMCS (Cont)
NOTE: Within designated interval, these checks are to be performed in the order listed.
M-Monthly
S-Semiannually
A-Annually
ITEM
INTERVAL
ITEM TO BE
NO.
INSPECTED
PROCEDURE
MS
A
18
Motor and Slinger
Check hydraulic motor for security in mounting.
Assembly
Tighten as required.
Check hydraulic fittings for Class III leaks. Repair
leaks.
Check slinger for abrasive wear or possible splits
in material. Repair/replace as required (para 4-52).
Check slinger assembly for damage, corrosion,
freedom of movement, or foreign objects. Replace
(para 4-51) or clean as required.
Check chutes for damage or missing hardware.
Replace as required (para 4-52).
19
Dolly Assembly
Check dolly frame for damage such as bends or
breaks. Replace as required (para 4-55).
Check lock/release levers for worn areas or
deterioration. Replace as required (para 4-55).
Check dolly weldment for cracks. Replace as
required (para 4-55).
Check dolly swivel casters for freedom of operation
and otherwise good condition. Repair/replace as
required (para 4-56/4-55).
Check mounting hardware for looseness. Tighten as
required.
4-8