TM 5-3740-214-14
FLUSH TANK MAINTENANCE (Continued)
a. Remove flush tank.
WARNING
BE SURE there is no pressure on the flush tank before removing it from aerosol generator.
Figure 4-103. Flush Tank Assembly
(1)
Disconnect flush line from three-way valve and flush tank.
(2)
Disconnect retaining strap.
(3)
Remove flush tank.
(4)
Remove mounting bracket from base and engine assemblies.
b. Install flush tank assembly.
(1)
Attach mounting bracket to base and engine assemblies.
(2)
Set flush tank on mounting bracket and tighten retaining strap.
(3)
Connect flush line to flush tank and three-way valve.
4-95/(4-96 Blank)
