TM 5-3740-214-14
CONTROL PANEL ASSEMBLY MAINTENANCE (Continued)
b. Install control panel assembly.
WARNING
BE SURE the aerosol generator ignition switch is turned OFF before installing control panel.
Figure 4-98. Control Panel Installation
(1)
Mount control panel on vehicle floor.
(2) Connect fluid hoses to temperature well inlet and flowmeter outlet. Be sure hoses are connected to
correct component.
(3)
Connect black air hose to pressure gage.
(4)
Connect wires to solenoid valve switch and ground.
(5)
Loosen universal joint and adjust control panel to a vertical position.
4-90
