308AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.311 DECEMBER 2001gallons) must have a minimum thickness of 3.16 mm (0.124 inches). 6HA1 drums with a capacitygreater than 120 L (32 gallons) must have a minimum thickness of 1.58 mm (0.0625 inches) for theinner plastic drum and a minimum thickness of 1.08 mm (0.043 inches) for the outer steel drum.A12.12.2.4.1. Cushion the inner drum within the outer drum with a shock-mitigating, nonreactive material. Theremust be a minimum of 5.0 cm (2 inches) of cushioning material between the outer surface (side) of the inner drumand the inner surface (side) of the outer drum, and at least 7.6 cm (3 inches) of cushioning material between theouter surface (top and bottom) of the inner drum and the inner surface (top and bottom) of the outer drum.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
