TM 10-8415-208-12
3-10.3.11 Removing/Installing Head Harness.
a.
Removing.
(1) Fully extend all five head harness straps (1).
(2) With one hand, push slide retainer (2) down.
(3) Pull strap (1) end through the top of buckle (3).
(4) Push slide retainer (2) up and pull strap (1) out of the bottom of buckle (3).
(5) Repeat steps a.(2) through a.(4) for the remaining head harness straps.
b.
Installing.
NOTE
The ribbed side of the head strap should lay against the head.
(1) Beginning with the forehead (top) strap, raise slide retainer (2).
(2) Work the end of head harness strap (1) through the bottom of buckle (3).
(3) Push slide retainer (2) down.
(4) Loop new strap (1) around slide retainer (2) and work the end of head harness strap (1) through the top of
buckle (3).
(5) Repeat steps b.(1) through b.(4) for the remaining head harness straps.
3-105