TM 10-8415-208-12
b.
Installing.
(1)
Work hose connector gasket (4) onto hose connector (3).
(2)
Slide connector nut (5) onto hose connector (3).
NOTE
Be sure to install a new hose clamp.
(3)
Place hose clamp (1) over hose (2).
(4)
Push hose connector (3) into the end of hose (2).
(5)
Tighten hose clamp (1) with a pair of pliers.
(6)
Connect the breathing hose to the rebreather and perform the Breathing System Leak Test. Refer to paragraph
3-10.4.2.
3-10.3.10 Removing/Installing Face Piece Lens.
a.
Removing.
3-103
