TM 10-5410-228-24
(7)
Check elbow (19) sealing surfaces for damage or material build up. If required, replace elbow
(19) or clean any material build up with clean, lint-free cloth.
(8)
Remove plug from port on hydraulic reservoir (3).
(9)
Coat male threads of elbow (19) with hydraulic sealant and coat the mating female threads on
reservoir (3) with primer.
(10) Install elbow (19) on hydraulic reservoir (3). Torque elbow (19) to 2 to 3 TFFT.
(11) Install new O-ring (20) (Item 63, Appx E) on elbow (19). Ensure O-ring (20) is seated and
retained properly.
(12) Lubricate O-ring (20) with a light coating of hydraulic fluid.
(13) Remove plug from end of tube assembly (18). Check tube assembly (18) sealing surfaces for
damage or material build up. Clean any material build up with clean, lint-free cloth. If required,
replace tube assembly (18) per para 3.9.11.
(14) Connect tube assembly (18) to elbow (19) on hydraulic reservoir (3), finger tight. Adjust position
of tube assembly (18) and elbow (19) as required.
(15) Torque tube assembly (18) on elbow (19) to 480 25 in.-lb (40 2 ft-lb).
(16) Check elbow (14) sealing surfaces for damage or material build up. If required, replace elbow
(14) or clean any material build up with clean, lint-free cloth.
(17) Remove plug from port on hydraulic reservoir (3).
(18) Coat male threads of elbow (14) with hydraulic sealant and coat the mating female threads on
reservoir (3) with primer.
(19) Install elbow (14) on hydraulic reservoir (3). Torque elbow (14) to 2 to 3 TFFT.
(20) Check tee (13) sealing surfaces for damage or material build up. If required, replace tee (13) or
clean any material build up with clean, lint-free cloth.
(21) Install new O-ring (17) (Item 63, Appx E) on elbow (14). Ensure O-ring (17) is seated and
retained properly.
(22) Lubricate O-ring (17) with a light coating of hydraulic fluid.
(23) Coat female threads of tee (13) with primer and coat mating male threads of elbow (14) with
hydraulic sealant.
(24) Install tee (13) on elbow (14) finger tight.
(25) Install new O-rings (15 and 16) (Item 63, Appx E) on tee (13). Ensure O-rings (15 and 16) are
seated and retained properly.
(26) Lubricate O-rings (15 and 16) with a light coating of hydraulic fluid.
(27) Remove two plugs from ends of tube assemblies (11 and 12). Check tube assemblies (11 and 12)
sealing surfaces for damage or material build up. Clean any material build up with clean, lint-
free cloth. If required, replace tube assemblies (11 and 12) per para 3.9.11.
(28) Coat male threads of tee (13) with hydraulic fluid.
(29) Connect tube assemblies (11 and 12) to tee (13), finger tight. Adjust position of tube assemblies
(11 and 12), tee (13), and elbow (14) as required.
(30) Torque tee (13) on elbow (14) to 480 25 in.-lb (40 2 ft-lb).
(31) Torque tube assemblies (11 and 12) on tee (13) to 480 25 in.-lb (40 2 ft-lb).
(32) Check elbow (7) sealing surfaces for damage or material build up. If required, replace elbow (7)
or clean any material build up with clean, lint-free cloth.
(33) Install new O-ring (10) (Item 59, Appx E) on elbow (7). Ensure O-ring (10) is seated and retained
properly.
3-131
