TM 10-5410-228-24
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
System power off.
ECV parking brake set.
ECU work platform installed (TM 10-5410-228-10).
a. Removal
(1)
Release six latches (1) and remove front top passenger side ECU cover (2).
(2)
Unscrew cap (3) on hydraulic reservoir filter assembly (4).
(3)
Rotate filter element (5) counterclockwise and remove from hydraulic reservoir filter assembly
(4). Discard filter element (5).
b. Installation
(1)
Place new filter element (5) in hydraulic reservoir filter assembly (4).
(2)
Rotate filter element (5) clockwise. Make sure filter element (5) is fully seated.
(3)
Screw cap (3) onto hydraulic reservoir filter assembly (4).
(4)
Install front top passenger side ECU cover (2) and engage six latches to secure (1).
Figure 3-24. Hydraulic Reservoir Filter Replacement
