TM 10-5410-228-24
3.9.20 Hydraulic Reservoir Replacement Continued.
(34) Lubricate O-ring (10) with a light coating of hydraulic fluid.
(35) Remove plug from port on filter assembly (8).
(36) Coat male threads of elbow (7) with hydraulic fluid.
(37) Install elbow (7) on filter assembly (8). Torque elbow (7) to 2,520 100 in.-lb (210 8 ft-lb).
(38) Install new O-ring (9) (Item 51, Appx E) on elbow (7). Ensure O-ring (9) is seated and retained
properly.
(39) Lubricate O-ring (9) with a light coating of hydraulic fluid.
(40) Remove plug from end of tube assembly (6). Check tube assembly (6) for damage or material
build up. Clean any material build up with clean, lint-free cloth. If required, replace tube
assembly (6) per para 3.9.11.
(41) Coat male threads of elbow (7) with hydraulic fluid.
(42) Connect tube assembly (6) to elbow (7), finger tight. Adjust position of tube assembly (6) and
elbow (7) as required.
(43) Torque tube assembly (6) on elbow (7) to 1,080 45 in.-lb (90 4 ft-lb).
(44) Check connector (2) sealing surfaces for damage or material build up. If required, replace
connector (2) or clean any material build up with clean, lint-free cloth.
(45) Install new O-ring (5) (Item 60, Appx E) on connector (2). Ensure O-ring (5) is seated and
retained properly.
(46) Lubricate O-ring (5) with a light coating of hydraulic fluid.
(47) Remove plug from port on hydraulic reservoir (3).
(48) Coat male threads of connector (2) with hydraulic fluid.
(49) Install connector (2) on hydraulic reservoir (3). Torque connector (2) to 3,100 150 in.-lb
(260 12 ft-lb).
(50) Install new O-ring (4) (Item 52, Appx E) on connector (2). Ensure O-ring (4) is seated and
retained properly.
(51) Lubricate O-ring (4) with a light coating of hydraulic fluid.
(52) Remove plug from end of tube assembly (1). Check tube assembly (1) for damage or material
build up. Clean any material build up with clean, lint-free cloth. If required, replace tube
assembly (1) per para 3.9.11.
(53) Coat male threads of connector (2) with hydraulic fluid.
(54) Install tube assembly (1) in ECU per para 3.9.11.
(55) Connect tube assembly (1) to connector (2). Torque tube assembly (1) to 1,680 90 in.-lb
(140 8 ft-lb).
3-132
