TM 10-5410-228-24
(13) Lubricate O-rings (14 and 11) with a light coating of hydraulic fluid.
(14) Install connector (9) on adapter (10), finger tight.
(15) Remove plug from tube assembly (8). Check tube assembly (8) sealing surfaces for damage or
material build up. Clean any material build up with clean, lint-free cloth. If required, replace
tube assembly (8) per para 3.9.11.
(16) Install tube assembly (8) on connector (9), finger tight. Adjust position of tube assembly (8) as
required.
(17) Torque both adapter (10) on hydraulic motor (3) and connector (9) to 220 15 in.-lb (18 1 ft-lb).
(18) Torque tube assembly (8) to 320 25 in.-lb (27 2 ft-lb).
(19) Check elbow (6) sealing surfaces for damage or material build up. If required, replace elbow (6)
or clean any material build up with clean, lint-free cloth.
Ensure O-rings (13 and 7) are seated and retained properly.
(21) Lubricate O-rings (13 and 7) with a light coating of hydraulic fluid.
(22) Coat male threads of elbow (6) with hydraulic fluid
(23) Remove plug in port of hydraulic motor (3). Install elbow (6) on hydraulic motor (3), finger tight.
(24) Remove plug from tube assembly (5). Check tube assembly (5) sealing surfaces for damage or
material build up. Clean any material build up with clean, lint-free cloth. If required, replace
tube assembly (5) per para 3.9.11.
(25) Install tube assembly (5) on elbow (6), finger tight. Adjust position of tube assembly (5) as
required.
(26) Torque elbow (6) on hydraulic motor (3) to 720 25 in.-lb (60 2 ft-lb).
(27) Torque tube assembly (5) to 1,080 45 in.-lb (90 4 ft-lb).
(28) Check elbow (2) sealing surfaces for damage or material build up. If required, replace elbow (2)
or clean any material build up with clean, lint-free cloth.
Ensure O-rings (12 and 4) are seated and retained properly.
(30) Lubricate O-rings (12 and 4) with a light coating of hydraulic fluid.
(31) Coat male threads of elbow (2) with hydraulic fluid.
(32) Remove plug in port of hydraulic motor (3). Install elbow (2) on hydraulic motor (3), finger tight.
(33) Remove plug from tube assembly (1). Check tube assembly (1) sealing surfaces for damage or
material build up. Clean any material build up with clean, lint-free cloth. If required, replace
tube assembly (1) per para 3.9.11.
(34) Install tube assembly (1) on elbow (2), finger tight. Adjust position of tube assembly (1) as
required.
(35) Torque elbow (2) on hydraulic motor (3) to 720 25 in.-lb (60 2 ft-lb).
(36) Torque tube assembly (1) to 1,080 45 in.-lb (90 4 ft-lb).
3-63
