TM 10-5410-228-24
Alcohol and adhesive are flammable and give off harmful vapors. Use in well ventilated area.
Avoid prolonged breathing of vapors. Keep away from heat, sparks, open flame. Wear gloves
when handling.
(1)
Clean adhesive residue from LMS.
(2)
Secure gasket (17) to LMS with adhesive.
NOTE
Reference TM 10-5411-224-14 for general repair procedures using rivets.
(3)
Secure two door keeper brackets (13) and two shims (16) to LMS with eight rivets (14) (Item 78,
(4)
Secure two keepers (10), two keeper shims (11) and two keeper shims (12) to two door keeper
brackets (13) with four screws (6), four flat washers (7), four new lockwashers (8) (Item 18,
d. Installation (Refer to Figure 2-30)
(1)
Secure door (4) with gasket (17) and six shims (5) to LMS with four screws (1), four flat washers
(2) and four new self-locking nuts (3) (Item 46, Appx E).
Wear gloves when working with sealers. Use in well ventilated area. Avoid prolonged contact
with skin.
(2)
Apply sealer around seam of two door hinges and door panel (4).
16
13
6
8
9
7
14
3
15
6
9
78
10
11
2
12
LMS
17
5
4
1
23-1-M
2-185
