TM 10-5410-228-24
Placing the control switches in the position corresponding the the above modes opens solenoid valves SV2
and SV6 and closes solenoid valve SV9 and valve PD1 by applying +24 Vdc to the coils. This allows some
portion of the total hydraulic fluid flow to bypass the NBC fan motor, M3. Flow control valve FP2 is used to
regulate the flow and hence the speed of the NBC fan motor whenever the control switches are in the non-
NBC mode. All other functions are as previously described.
Valve
SV1
SV2
SV4
SV5
SV6
SV7
SV8
SV9
Energized State
OFF
ON
ON
OFF
ON
OFF
OFF
ON
Position
Closed
Open
Open
Closed
Open
Open
Closed
Closed
Figure 1-14. Static Mode, Internal Power, Cool Mode, NBC Off
