TM 5-3740-218-13&P
HYDRAULIC RESERVOIR PRIMARY MANIFOLD ASSEMBLY REPAIR (CONT)
C.
ASSEMBLY
(1) Install reservoir filler breather cap (1) and six slotted-head screws (2).
(2) Apply pipe joint sealer (item 56, Appendix E) to threads and install reservoir sight gage (3).
(3) Apply pipe joint sealer (item 56, Appendix E) to threads and install fittings (4 and 5) on reservoir tank (6).
(4) Apply pipe joint sealer (item 56, Appendix E) to threads and install brass gate valve (7) on fitting (4).
(5) Apply pipe joint sealer (item 56, Appendix E) to threads and install drain pipe (8) on brass gate valve (7).
(6) Apply pipe joint sealer (item 56, Appendix E) to threads and install fitting (9) on reservoir tank(6).
(7) Apply pipe joint sealer (item 56, Appendix E) to threads and install filter housing (10) on fitting (11).
(8) Apply pipe joint sealer (item 56, Appendix E) to threads and install fitting (12) on filter housing (10).
(9) Install new 10-micron filter (13) on filter housing (10).
(10) Install new O-ring (14) in primary manifold (15).
(11) Align primary manifold (15) with hydraulic tank mounting studs (16) and secure with four washers (17) and four
nuts (18).
(12) Install plug (19).
4-88
