TM 5-3740-218-13&P
HYDRAULIC RESERVOIR PRIMARY MANIFOLD ASSEMBLY REPLACEMENT (CONT)
C.
INSTALLATION
(1) Align hydraulic reservoir primary manifold assembly (1) on bucket weldment unions (2) and secure with four
washers (3), two bolts (4), and two nuts (5).
(2) Remove cap and connect hose (6).
(3) Tighten clamp (7).
(4) Remove cap and connect quick-disconnect hydraulic hose (8) to filter (9).
(5) Remove cap and connect hydraulic hose (10) to filter (9).
(6) Connect two electrical leads (11) to primary manifold 12 V coil (12).
(7) Remove caps and connect three hydraulic hoses (13) to primary manifold fittings.
(8) Make sure gate valve (14) is closed. Fill hydraulic reservoir with hydraulic fluid (item 10, Appendix E).
4-84
