TM 5-3740-214-14
ELECTRICAL PARTS GROUP (Continued)
c.
Testing electrical parts group.
(1)
Test all electrical wires. Use a volt-ohmmeter.
(a) Attach a meter lead to each end of the wire being tested.
(b) Test the conductance of the wire.
(c) If it conducts a current it is okay.
(d) Wiggle the wire around. If the needle does not jump around, the wire is ok.
(e) Replace any damaged wire.
Figure 5-230. Engine Coil Location
(2)
Test secondary coil winding while the coil is still hooked up to the battery.
5-213
