TM 5-3740-214-14
ELECTRICAL PARTS GROUP (Continued)
Figure 5-224. Engine Breaker Point Assembly
(3)
Remove and disassemble breaker points.
(a) Remove breaker point cover and gasket.
(b) Separate grommet from breaker point cover.
(c) Disconnect breaker point wire.
(d) Remove breaker points and bracket.
(e) Remove push rod.
(f) Remove breaker point wire clip.
(4)
Disconnect stator wires and remove rectifier regulator.
(5)
Disconnect starter wire from starter.
(6)
Remove starter, engine control panel and side cooling baffle.
5-209
