TM 5-3740-214-14
Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE OVERHEATS (Continued)
(2)
Loosen the point gap adjustment screw and place an 0.020 inch (0.52 mm) feeler gage between
the points.
(3)
Tighten the adjusting screw after setting the gap.
(4)
Replace the breaker point cover and go to Step 4e.
e.
Start the engine.
11.
ENGINE BACKFIRES
Step 1.
Check the breaker points.
Figure 5-185. Breaker Point Cover
5-167
