TM 5-3740-214-14
Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE DOES NOT TURN OVER (Continued)
l.
If there are no opens, shorts or grounds, go to Step 4.
m.
Reassemble the starter and test it.
(1)
Reassemble the starter.
(2)
Connect the starter to a 12 volt battery. If the starter turns over, return it to the engine. If the
starter does not turn over, replace it and go to Step n.
n.
Start the engine.
(1)
If the engine starts, the problem is solved.
(2)
If the engine does not start, go to Step 4.
Step 4.
Check internal parts.
a.
Turn crankshaft by hand.
(1)
If it will not turn or if it turns with difficulty notify your supervisor.
(2)
If the engine makes a grinding or rattling noise notify your supervisor.
b.
Replace the engine if the internal parts are damaged. DO NOT overhaul engine unless a new engine
is not available.
5-55
