TM 5-3740-214-14
Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE DOES NOT START BUT TURNS OVER (Continued)
(1)
Remove the air cleaner and air cleaner bracket.
(2)
Disconnect the throttle linkage and remove the carburetor from the engine.
NOTE
To remove the carburetor from the engine, it is necessary to loosen one mounting screw, then the
other. Pull the carburetor away from the engine and loosen each screw again. Repeat this
procedure until the carburetor can be removed from the engine.
Figure 5-44. Carburetor Disassembly
5-39
