TM 5-3740-214-14
Table 5-3. Direct and General Support Maintenance Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE DOES NOT START BUT TURNS OVER (Continued)
(4)
If the wire does not conduct electricity or it causes the needle to fluctuate, replace it and go to
Step 4e.
(5)
If any of the wires or insulation are frayed, broken, or cracked, replace them and go to Step 4e.
e. Start the engine.
(1)
If the engine starts, the problem is solved.
(2)
If the engine does not start, go to Step 5.
Figure 5-30. Spark Plug Wire Test
5-27
