TM 5-3740-214-14
ENGINE ASSEMBLY MAINTENANCE (Continued)
(4)
Reassemble battery box and install battery.
(a) Insert mounting bolts in battery box holes in base assembly.
(b) Slide battery box over screws.
(c) Tighten battery box to base assembly with washers, spacers, and nuts.
(d) Install battery in battery box.
(e) Place hold down bracket on battery and attach it with washers and wing nuts.
WARNING
BE ALERT not to spill or splash electrolyte on skin. Electrolyte is sulfuric acid and will cause
severe burns.
(f) Add electrolyte O-S-801B to battery. The electrolyte should be at least 0.250 inches (6.35 mm) above
battery plates. The electrolyte should not be allowed to overflow on to the top of the battery.
MUFFLER ASSEMBLY MAINTENANCE
Figure 4-86. Muffler Assembly
a. Removal and disassembly.
(1)
Remove muffler and nipple.
(2)
Loosen locknut.
(3)
Remove street elbow and locknut.
4-79
