TM 5-3740-214-14
Table 2-1. Operator Preventive Maintenance Check and Services (Continued)
B - Before
D - During
A - After
INTERVAL
FOR READINESS REPORT-
ITEM
ITEM TO BE INSPECTED.
ING, EQUIPMENT IS NOT
NO.
B
D
A
PROCEDURE
READY/AVAILABLE IF:
ENGINE ASSEMBLY (Continued)
Figure 2-5. Engine Crankcase and Dipstick
ENGINE ASSEMBLY (Continued)
CAUTION
DO NOT overfill. The oil level
must not be higher than the full
(F) mark.
d. If oil level is at or below low (L) mark, add oil MIL-
L-2104C through dipstick hole.
e. Make sure oil level is at or below full (F) mark.
f. Return plug dipstick to engine and tighten it.
3
ELECTRICAL PARTS
a. Make sure all wires are securely fastened to terminals. Any electrical wires or term-
inals are damaged or loose
b. Check all wire and cable insulation for cracks, burns,
fraying, or chafing. Notify your supervisor of any damaged
wires.
2-5
