AFMAN 24-204(I)/TM 38-250/NAVSUP PUB 505/MCO P4030.19H/ DLAI 4145.3
301
11 DECEMBER 2001
Attachment 12
CLASS 8--CORROSIVE MATERIALS
A12.1. General Requirements. This attachment contains information concerning the packaging and general
handling instructions for Class 8 (corrosive materials).
A12.2. General Handling Instructions for Corrosive Materials.
-
Store corrosive materials in a cool, well ventilated area away from sources of heat and oxidizing agents.
-
Both the vapor and the liquid are corrosive and irritating and cause burns to the body and damage to the
aircraft.
-
Properly placard the storage area.
-
Ensure protective masks or respirators, rubber gloves, goggles, and other protective clothing as required are
readily available.
A12.3. Packaging for Liquid Class 8 Materials. Package in (see also Atch 3):
A12.3.1. Steel drum (1A1 or 1A2), aluminum drum (1B1 or 1B2), or metal drum, other than steel or aluminum
(1N1 or 1N2) with inside glass, earthenware, plastic, or metal receptacles.
A12.3.2. Plywood drum (1D), fiber drum (1G), or plastic drum (1H1 or 1H2), with inside glass, earthenware,
plastic, or metal receptacles.
A12.3.3. Wooden barrel (2C2), with inside glass, earthenware, plastic, or metal receptacles. Not authorized for PG
I material.
A12.3.4. Steel jerrican (3A1 or 3A2), aluminum jerrican (3B1 or 3B2), or plastic jerrican (3H1 or 3H2), with inside
glass, earthenware, plastic, or metal receptacles.
A12.3.5. Steel box (4A) or aluminum box (4B) with inside glass, earthenware, plastic, or metal receptacles.
A12.3.6. Natural wood box (4C1 or 4C2), plywood box (4D), or reconstituted wood box (4F), with inside glass,
earthenware, plastic, or metal receptacles.
A12.3.7. Fiberboard box (4G) with inside glass, earthenware, plastic, or metal receptacles.
A12.3.8. Expanded plastic box (4H1) or solid plastic box (4H2) with inside glass, earthenware, plastic, or metal
receptacles.
A12.3.9. Steel drum (1A1 or 1A2), aluminum drum (1B1 or 1B2), or metal drum, other than steel or aluminum
(1N1 or 1N2).
A12.3.10. Plastic drum (1H1 or 1H2), fiber drum (1G) with liner (only authorized for PG III material) .
A12.3.11. Wooden barrel (2C1). Not authorized for PG I material.
A12.3.12. Steel jerrican (3A1 or 3A2), aluminum jerrican (3B1 or 3B2), or plastic jerrican (3H1 or 3H2).
A12.3.13. Single, composite package comprised of a plastic receptacle in steel, aluminum, fiber, or plastic drum
(6HA1, 6HB1, 6HG1, or 6HH1).
A12.3.14. Single, composite package comprised of a plastic receptacle in steel, aluminum, wooden, plywood, or
fiberboard box (6HA2, 6HB2, 6HC, 6HD2, or 6HG2).
A12.3.15. Single, composite package comprised of glass, porcelain, or stoneware in steel, aluminum, or fiber drum
(6PA1, 6PB1, or 6PG1).
A12.3.16. Single, composite package comprised of glass, porcelain, or stoneware, in steel, aluminum, wooden, or
fiberboard box (6PA2, 6PB2, 6PC, or 6PG2).
A12.3.17. Single, composite package comprised of glass, porcelain, or stoneware in solid or expanded plastic
packaging (6PH1 or 6PH2).
A12.3.18. Single, composite package comprised of a plastic receptacle in a plywood drum (6HD1.) Not authorized
for PG I material.
A12.3.19. DOT specification cylinders as prescribed for any compressed gas, except DOT 8 (acetylene) and DOT
3HT.
A12.3.20. DS2 may be packaged in:
