TM 3-6665-329-13&P
(2) Plain Hexagon Nut
a.
Remove four screws (5), washers (6) and gage mounting plate assembly (7).
b.
Remove item from clip.
Remove screw (3) and clip (4).
c.
Remove screw (8), remove plain hexagon nut (9).
d.
Apply sealing compound (item 2, app D) to threads of screw (8).
e.
f.
Position plain hexagon nut (9) over mounting hole and secure with screw (8).
Install clip (4) with screw (3).
g.
h.
Apply sealing compound (item 2, app D) to threads of screws (5).
i. Position gage mounting plate assembly (7) over mounting holes. Secure with four
four screws (5) and washers (6).
(3) Clamp.
a. Unscrew screw (10) and remove extender board (11).
b. Remove locknut (12), screw (13), washers (14) and clamp (15).
c. Install clamp (15) and secure with screw (13), washers (14), and locknut (12).
d. Install extender board (11) and tighten screw (10).
(4) Guides and Stop.
a. Remove four screws (5), washers (6) and gage mounting plate assembly (7).
b. Unscrew screw (10) and remove extender board (11).
c. Remove two nuts (16), Iockwashers (17), washers (18), screws (19) and guide
(20) or stop (21).
d. Install guide (20) or stop (21) and secure with two screws (19), washers (18),
Iockwashers (17) and nuts (16).
3-56