4. Release the four latches (5) holding case-bottom
receiver (7).
Disengage latches from catches on
TM 3-6665-316-12
assembly (6) to
receiver ring.
5.
Pull up on detector carrying handle until extender clears rim of
case-bottom assembly.
6.
Position case-top assembly so that the word CAUTION and black
radiation-hazard symbol are toward you.
7.
Locate Connector P1 (8) on the decoder printed wiring assembly.
8.
Push two release levers (9) apart until M43A1 Interface Cable con-
nector is ejected from Connector P1.
4-27
