Maintenance Allocation Chart

APPENDIX I REFERENCES

APPENDIX III BASIC ISSUE ITEM LIST

Maintenance Manual Adapter, Line Filling, 1-Ton Container, M1
Page Navigation
10

TM 3-4730-200-15

which maintenance can be performed; and the

INSPECT

To verify serviceability and to detect

maintenance operations which are authorized to be

incipient electrical or mechanical

performed on each.

failure by scrutiny.

c. Columns 3, 4, 5, 6, and 7, Maintenance

REPLACE

To substitute serviceable assemblies

Echelon. An X indicates the lowest echelon authorized

and subassemblies for unserviceable

to perform the prescribed maintenance operation.

component parts.

d. Column 8, Remarks.

Column 8 is used for

REPAIR

To restore an item to serviceable

special instructions.

condition through correction of a

specific failure or unserviceable

2. Use of Chart

condition. This function includes but

is not limited to, inspecting, cleaning,

Determine from the chart the echelon that is

preserving,

adjusting,

replacing,

authorized to perform the required maintenance

welding, riveting, and straightening.

operation. Refer to the next in the appropriate part of

the maintenance manual for instructions in performing

SYMBOL X

The symbol X placed in the appropriate

the authorized maintenance operations as defined.

column

indicates

the

echelon

responsible

for

performing

that

particular maintenance operation, but

does not necessarily indicate that

repair parts will be stocked at that

level.

Echelons higher than that

echelon marked by "X" are authorized

to perform the indicated operation.

Maintenance Allocation Chart

Index

Component and related maintenance operation

Maintenance echelon

Remarks

No.

(1)

(2)

(8)

1st

4th

5th

(3)

(4)

(5)

(6)

(7)

Adapter, Angle, Valve, Type D and E Containers

Inspect --------------------------------------------------------------

Repair ---------------------------------------------------------------

----