INSPECTION STANDARD FOR TANK UNIT
Item
Inspection Standard
Inspection Standard
Item
Must not leak. Must be operable throughout its
Diaphragm Valve
No stripped threads.
Bolts and Screws
entire range from full open to shut off. Protective
cap must be in place.
Welds
Welded joints must not show signs of separation or
failure.
Hoses and fittings must not be deformed or bro-
Hoses
ken.
Must be free of rust, cracks, breaks, or stripped
Lifting and Tie-down
threads.
Eyes
Hopper-blender
Must not be punctured. Numbers on the tank liq-
Painted surfaces must be in good condition and
Paint
uid level indicator must be legible. Gaskets must
free of bare spots, rust, and peeling.
be present and in good condition. Strainer must
be clean.
Must be free of leaks.
Water Tank
INSPECTION STANDARD FOR SHOWER ASSEMBLY
Item
Inspection Standard
Inspection Standard
Item
Must be present in couplings and free of cracks.
Gaskets
Pipes
Piping must not be bent or broken or have missing
lengths. Holes must be clear in the showering sec-
Sediment Strainer
The mesh screen must be clean and free of tears.
tion pipes. Threads must not be stripped.
Both halves must be present and not deformed or
Quick Release
broken.
TM 3-4230-209-30&P
2-247
